Food Grade Lubricants

Protect food processing equipment with high quality food grade lubricants. Food grade lubricants must perform the functions of traditional lubricants such as protecting against wear and friction, dissipating heat, and so on. However, they also must comply with the FDA's requirements for food safety.

Grid List

Set Descending Direction

Items 1-10 of 53

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. JAX Flow Guard Synthetic ISO 46 (5 Gal. Pail)

    JAX Flow Guard Synthetic ISO 46 (5 Gal. Pail)

    $179.50

    JAX Flow-Guard Synthetic ISO 46 food-grade hydraulic fluid is compounded with 100% PAO base fluid and the best available additive technologies to provide superior performance over any competitive food-grade lubricating oils. It contains an effective combination of antiwear agents, rust inhibitors, and polymeric viscosity improvers that provide outstanding long-term wear advantages over other food-grade hydraulic oils, while its robust antioxidant chemistry ensures long-drain, deposit-free operation.

    Safety Data Sheet

    Learn More
  2. Mobil SHC Polyrex 005

    Mobil SHC Polyrex 005 (Pail)

    $509.00

    Mobil SHC Polyrex 005 is an ISO VG 220, NLGI 00 synthetic grease that solves high temperature lubrication problems in general industry and food processing applications. It is polymer-enhanced and was developed using advanced Polyurea technology. This is a high temperature lubrication solution (up to 170°C) that has a full NSF H1 registration, allowing it to be used in food and beverage packaging and processing applications.

    Mobil SHC Polyrex 005 is designed for use in central grease systems and is an ideal choice for environements with low ambient temperatures, such as food processing freezers or outdoor applications. It can also be used in enclosed gear applications where leakage is a concern. The recommended operating range is -30 to 170 ° C.

    Product Data Sheet

    Learn More
  3. Mobil SHC Cibus 460

    Mobil SHC Cibus 460 (Pail)

    $260.00

    This item requires a lead time of 10-14 business days.

    Mobil SHC Cibus™ 460 is an ISO VG 460 hydraulic, compressor, gear and bearing oil that provides outstanding equipment protection, long oil life and trouble-free operation in food and beverage processing and packaging applications. It is registered NSF H1 for incidental food contact and also complies with Title 21 CFR 178.3570 by the Food and Drug Administration (FDA). Formulated from FDA and NSF registered hydrocarbon base fluids and additives, it combines a naturally high viscosity index and proprietary additive system to provide performance that is superior to typical mineral oils in a wide variety of service applications at high and low temperatures, high loading and in areas of high wash-down. This excellent product is carefully engineered to help extend the service life of machinery components and more economical equipment design, providing good wear protection, excellent oxidation stability, good system cleanliness, and protection against rust and corrosion, even in moist environments. It is compatible with seals and other materials used in equipment normally lubricated with mineral oils.

    Mobil SHC Cibus™ 460 can be used as hydraulic, gear, bearing and circulating oil in all areas of the food processing plant and can be included as part of a HACCP plan. It is suitable for Kosher and Halal food preparation and offers processing engineers maximum flexibility during operations. It is pale in color and is low odor, as well as being free of animal derived materials and allergens from nuts, wheat or gluten. It performs well on non-conforming surfaces as a result of low fluid friction, resulting in lower operating temperatures and more efficient equipment. This also could potentially result in reduced power consumption. Due to its wide range of applications and NSF H1 registration, Mobil SHC Cibus™ 460 can be used both above and below the processing line.

    Product Data Sheet

    Learn More
  4. Mobil SHC Cibus 150

    Mobil SHC Cibus 150 (Pail)

    $249.00

    Mobil SHC Cibus™ 150 is an ISO VG 150 hydraulic, compressor, gear and bearing oil that provides outstanding equipment protection, long oil life and trouble-free operation in food and beverage processing and packaging applications. It is registered NSF H1 for incidental food contact and also complies with Title 21 CFR 178.3570 by the Food and Drug Administration (FDA). Formulated from FDA and NSF registered hydrocarbon base fluids and additives, it combines a naturally high viscosity index and proprietary additive system to provide performance that is superior to typical mineral oils in a wide variety of service applications at high and low temperatures, high loading and in areas of high wash-down. This excellent product is carefully engineered to help extend the service life of machinery components and more economical equipment design, providing good wear protection, excellent oxidation stability, good system cleanliness, and protection against rust and corrosion, even in moist environments. It is compatible with seals and other materials used in equipment normally lubricated with mineral oils.

    Mobil SHC Cibus™ 150 can be used as hydraulic, gear, bearing and circulating oil in all areas of the food processing plant and can be included as part of a HACCP plan. It is suitable for Kosher and Halal food preparation and offers processing engineers maximum flexibility during operations. It is pale in color and is low odor, as well as being free of animal derived materials and allergens from nuts, wheat or gluten. It performs well on non-conforming surfaces as a result of low fluid friction, resulting in lower operating temperatures and more efficient equipment. This also could potentially result in reduced power consumption. Due to its wide range of applications and NSF H1 registration, Mobil SHC Cibus™ 150 can be used both above and below the processing line.

    Product Data Sheet

    Learn More
  5. JAX Halo-Guard FG-LT

    JAX Halo-Guard FG-LT (Case - 10 Tubes)

    $74.50

    JAX Halo Guard FG-LT is an enhanced food-grade grease with a calcium sulfonate complex, high-temperature thickener. It has excellent EP capabilities, water resistance, and rust and corrosion control. This high-performance grease is suitable for plant-wide applications. Covers NLGI #0 and #1. H-1

    Safety Data Sheet

    Learn More
  6. Mobil SHC Polyrex 462 Cartridge

    Mobil SHC Polyrex 462 (Case - 10 Tubes)

    $166.56

    Mobil SHC Polyrex 462 is an NLGI 2 grease for use in both industrial and food processing applications on heavily loaded plain/antifriction bearings and where extreme temperatures are a concern,such as steam heated rolls,exhaust fan bearings, felt roll bearings, and oven conveyor bearings. It provides excellent lubrication and equipment protection for temperatures up to 170°C. This exceptional grease has high load carrying capabilities and provides rust and corrosion protection, making it especially suitable for moist, humid evironments. In addition, it is hightly resistant to water, making it a great choice where water wash downs are frequent. It was developed using a polyurea thickener and synthetic base stock, and is rated NSF H1.

    Product Data Sheet

    Learn More
  7. Mobil SHC Polyrex 222 Tube

    Mobil SHC Polyrex 222 (Case - 10 Tubes)

    $140.00

    Mobil SHC Polyrex 222 is an ISO VG 220, NLGI 2 synthetic grease that solves high temperature lubrication problems in general industry and food processing applications. It is polymer-enhanced and was developed using advanced Polyurea technology. This is a high temperature lubrication solution (up to 170°C) that has a full NSF H1 registration, allowing it to be used in food and beverage packaging and processing applications.

    Product Data Sheet

    Learn More
  8. JAX Dry Glide FG Silicone (Pail)

    JAX Dry Glide FG Silicone (Pail)

    $178.50

    This item has a lead time of 10-14 business days.

    Formulated with a high concentration of premium, food-grade silicone fluid. Use for waterproofing and eliminating friction. Use on chutes, conveyors, boxing and folding machines, knives, and saws.

    Safety Data Sheet

    Learn More
  9. Mobilith SHC 220

    Mobilith SHC 220 (Case - 10 Tubes)

    $75.00

    Mobilith SHC 220 is a supreme performance NLGI Grade 2 multipurpose, heavy duty grease. It is formulated with Synthetic ISO Viscosity Grade (VG) 220 base fluid and a high quality lithium complex thickener. It has a recommended operating temperature range of -40 °C to 150 °C with appropriate relubrication intervals. Mobilith SHC 220 meets or exceeds DIN 51825: (2004-06) KPHC 2N-30. This grease has a lower coefficient of friction than similar conventional greases and has the potential to provide increased mechanical life and reduced energy consumption.

    Mobilith SHC 220 is an extreme pressure (EP), high temperature grease recommended for heavy-duty automotive and industrial applications. It can be used in a variety of applications including chassis lube points and wheel bearings.

    Product Data Sheet

    Learn More
  10. Mobil SHC Polyrex 462 Pail

    Mobil SHC Polyrex 462 (PAIL)

    $545.00

    Mobil SHC Polyrex 462 is an NLGI 2 grease for use in both industrial and food processing applications on heavily loaded plain/antifriction bearings and where extreme temperatures are a concern,such as steam heated rolls,exhaust fan bearings, felt roll bearings, and oven conveyor bearings. It provides excellent lubrication and equipment protection for temperatures up to 170°C. This exceptional grease has high load carrying capabilities and provides rust and corrosion protection, making it especially suitable for moist, humid evironments. In addition, it is hightly resistant to water, making it a great choice where water wash downs are frequent. It was developed using a polyurea thickener and synthetic base stock, and is rated NSF H1.

    Product Data Sheet

    Learn More

Grid List

Set Descending Direction

Items 1-10 of 53

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5