XOM111099

Mobil 600W Cylinder Oil (PAIL)

SKU# XOM111099

Be the first to review this product

$102.39

Quick Overview

Mobil 600W Cylinder Oil is an extra high performance high viscosity oil designed for use in enclosed worm gears operating at moderate to high speeds and temperatures, and where heavy loads, slow speeds or high temperatures demand high viscosity oils. It is also intended for use in all steam engine applications. It is formulated from high quality base stocks that are resistant to oxidation and thermal degradation, and the build-up of harmful deposits caused by the high operating temperatures of steam cylinders. It protects against rust and corrosion and provides good film strength and excellent lubricity and it is resistant to water washout.


Mobil 600W Cylinder Oil is additized to enhance their frictional and load-carrying properties. It is widely used in worm gear applications, couplings and bearings, with viscosity grade depending on operating conditions. In steam applications Mobil 600W Super Cylinder Oil is recommended for saturated and superheated steam up to a temperature of 260ºC. It can be applied both by drip feed cups and force feed mechanical lubricating devices.


Mobil Cylinder Oils are the benchmark mineral product for worm gear OEMs and users, and are still recognised as leading products for steam cylinder applications.


Product Data Sheet

Mobil 600W Cylinder Oil Pail

Click on image to zoom

More Views

  • Mobil 600W Cylinder Oil Pail
Features

The Mobil Cylinder Oil brand of lubricants represents the earliest lubricant product marketed by our Corporation's predecessor companies. 600W Cylinder Oil was produced by the Vacuum Oil Company in the second half of the 19th century and was a breakthrough product of its time. Continual upgrading and application of the latest base oil and additive technology has maintained this product series as a leader in its application areas. While steam cylinder applications are now less common, the reputation of Mobil Cylinder Oils in worm gear applications remains unmatched among mineral-based products. Mobil Cylinder Oils offer the following features and potential benefits:

Features

Advantages and Potential Benefits

Excellent film integrity at high temperatures

Excellent equipment protection at high temperatures occasioned by variable load conditions, avoiding unexpected downtime and equipment replacement

 

Provision of good sealing film round rods and in glands in steam applications

Excellent resistance to deposit formation at high temperatures

Resistant to deposits on areas subject to high spot temperatures, maintaining cleaner systems, requiring less maintenance

Excellent anti-wear and low friction properties

Additized grades give reduced wear and high efficiency

Very good water separation in absence of additives

Non-additized grade gives ready separation from condensate

High quality and built in performance features

Results in fewer unplanned stoppages and reduced maintenance costs

Applications

Mobil 600W Cylinder Oil is recommended for the following applications:

  • The splash lubrication of enclosed worm gears operating at moderate to high speeds and temperatures. (Mobil 600 W Cylinder Oil)

  • Steam cylinders, couplings, bearings, and break-in of compressor cylinders (Mobil 600 W Cylinder Oil)

  • Mobil 600W Super Cylinder Oil and Mobil Extra Hecla Super Cylinder Oil are recommended for the above applications but under higher temperature and load conditions

  • Mobil Extra Hecla Super Cylinder Mineral is recommended where ready separation from condensate is essential, for example, where exhaust steam is used for process work

  • Mobil Extra Hecla Super Cylinder Mineral may also be used as a tempering oil for bath temperatures up to 290C
Specifications
Typical Properties

Mobil Cylinder Oils

Mobil 600 W Cylinder Oil

Mobil 600 W Super Cylinder Oil

Mobil Extra Hecla Super Cylinder Oil

Mobil Extra Hecla Super Cylinder Oil Mineral

ISO Viscosity Grade

--

460

680

1000

Viscosity, ASTM D 445

       

cSt @ 40ºC

375

460

680

1000

cSt @ 100ºC

27.0

30.5

35.8

43.0

Viscosity Index, ASTM D 2270

95

95

85

80

Pour Point, ºC, ASTM D 97

-9

-6

0

3

Flash Point, ºC, ASTM D 92

282

282

282

288

Density,ASTM D4052 @15.6º C kg/l,

0.90

0.91

0.92

0.92

Copper Strip Corrosion, ASTM D 130,3 hrs @ 100º C

1B

1B

1B

1B