XOM110830

Mobil SHC 624 (PAIL)

SKU# XOM110830

Be the first to review this product

$205.30

Quick Overview

Mobil SHC 624 is a superb performing synthetic ISO Viscosity Grade (VG) 32 gear and bearing oil. It is formulated from synthetic base fluids with inherently high viscosity index and a unique, proprietary additive system which enables it to provide outstanding performance in extreme service applications at high and low temperatures, well beyond the capabilities of mineral oils. Mobil SHC 624 meets or exceeds ISO 12925-1 CKB and AGMA 9005 EO2. Mobil SHC 624 is capable of exceptional performance in terms of equipment protection, oil life, and problem-free operation enabling increased productivity. Mobil SHC 624 has a low traction coefficient relative to mineral oil and is generally compatible with other Polyalphaolefin based synthetics and mineral oils. Its lower traction coefficient can provide reduced power consumption and lower operating temperatures.


Mobil SHC 624 is an excellent choice for extreme gear and bearing applications requiring ISO VG 32 oils.


Product Data Sheet

Mobil SHC 624 Pail

Click on image to zoom

More Views

  • Mobil SHC 624 Pail
Features

The Mobil SHC brand of lubricants are recognized and appreciated around the world for their innovation and outstanding performance. These molecular designed synthetic products, pioneered by our research scientists, symbolize the continuing commitment to using advanced technology to provide outstanding lubricant products. A key factor in the development of Mobil SHC 600 Series were the close contacts between our scientists and application specialists with key OEMs to ensure that our product offerings will provide exceptional performance in the continually evolving industrial equipment designs.

Our work with equipment builders has helped confirm the results from our own laboratory tests showing the exceptional performance of the Mobil SHC 600 Series lubricants. Not least among the benefits, shown in work with OEMs, is the potential for significant efficiency improvements in changing from mineral oil. These benefits are particularly evident in equipment which, by design, cannot avoid low overall efficiency, such as high ratio worm gears.

To combat high thermal exposure of the oil, our product formulation scientists chose select base oils for Mobil SHC 600 Series oils because of their exceptional thermal/oxidative resistance potential. Our formulators chose specific additives which would maximize the benefits of the base oils to provide excellent oil life and deposit control and resistance to thermal/oxidative and chemical degradation. This formulation approach provides low temperature fluidity characteristics unmatched by mineral products and is a key benefit for remote, low ambient temperature applications. The Mobil SHC 600 Series oils offer the following features and potential benefits:

Features

Advantages and Potential Benefits

Superb high temperature thermal/oxidation resistance

Extends equipment high temperature operating capability

 

Long oil life, reduced need and costs for oil change outs

 

Minimizes sludge and deposits for trouble-free operation and long filter life

High Viscosity Index and absence of wax

Maintains viscosity and film thickness at high temperatures

 

Exceptional low temperature performance, including start-up

Low traction coefficient

Reduces overall friction and can increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures.

 

Minimizes effects of micro slip in rolling contact bearings for longer rolling-element life potential

High load carrying capability

Protects equipment and extends life; minimizes unexpected downtime and extends service periods

Balanced additive combination

Provides excellent performance in terms of rust and corrosion prevention, water separability, foam control, air release performance ensuring problem-free operation in a wide range of industrial applications and reduced operating costs

Applications

While Mobil SHC 600 Series are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC 600 Series, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. The Mobil SHC 600 Series oils are compatible with the following seal materials: fluorocarbon, polyacrylate, polyurethane ether, some silicone, ethylene/acrylic, chlorinated polyethylene, polysulfide, and some nitrile rubbers. There is the potential for substantial variations in the elastomers being used today. For best results, consult your equipment supplier, seal manufacturer, or your local Mobil representative to verify compatibility.

Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is needed. They are particularly effective in applications where the maintenance costs of component replacement, system cleaning and lubricant changes are high. Specific applications include:

  • Filled for life gearboxes, especially high ratio/ low-efficiency worm gears

  • Remotely located gearboxes, where oil change-out is difficult

  • Low temperature applications, such as ski lifts where seasonal oil changes can be avoided

  • Mixer roll bearings and roll neck bearings where high temperatures are encountered

  • Plastic calendars

  • Severe centrifuge applications, including marine centrifuges

  • Railroad A/C Traction Drives

  • Mobil SHC 625*, 627, 629 and 630 are suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
Specifications

Mobil SHC 600 Series has the following builder approvals:

624

625

626

627

629

630

632

634

636

639

ABB TURBO HZTL 90572

   

X

             

ABB TURBO HZTL 90617

   

X

             

CINCINNATI MACHINE P-34

               

X

 

CINCINNATI MACHINE P-35

             

X

   

CINCINNATI MACHINE P-59

           

X

     

CINCINNATI MACHINE P-74

         

X

       

CINCINNATI MACHINE P-78

                 

X

CINCINNATI MACHINE P-80

   

X

             

FLENDER BA 7300 table A

       

X

       

X

FLENDER BA 7300 table A and C

         

X

X

X

   
Typical Properties

Mobil SHC 600 Series

624

625 (1)

626

627

629

630

632

634

636

639

ISO Viscosity Grade

32

46

68

100

150

220

320

460

680

1000

Viscosity, ASTM D 445

                   

cSt @ 40º C

31.0

46.0

66.0

97.0

149

222

320

454

652

968

cSt @ 100º C

5.8

7.7

10.3

13.7

19.0

25.7

35.0

46.5

61.2

78.5

Viscosity Index, ASTM D 2270

133

136

144

144

144

147

154

161

163

159

Pour Point, ºC, ASTM D 97

-51

-48

-48

-45

-45

-42

-40

-40

-39

-33

Flash Point, ºC, ASTM D 92

237

242

231

228

235

240

236

234

240

235

Specific Gravity, ASTM D 4052, 15º C/15º C

0.85

0.85

0.86

0.86

0.86

0.87

0.87

0.87

0.87

0.87

Appearance, visual

Orange

Orange

Orange

Orange

Orange

Orange

Orange

Orange

Orange

Orange

TOST, ASTM D 943, Hours to 2 NN

10,000+

10,000+

10,000+

10,000+

10,000+

10,000+

10,000+

10,000+

10,000+

10,000+

RBOT, ASTM D 2272, min.

1750

1750

1750

1750

1750

1750

1750

1750

1750

1750

Rust protection, ASTM D665, Sea Water

Pass

Pass

Pass

Pass

Pass

Pass

Pass

Pass

Pass

Pass

Water Seperability, ASTM D 1401,Min. to 37 ml water @ 54º C

20

20

20

-

-

-

-

-

-

-

Water Seperability, ASTM D 1401,Min. to 37 ml water @ 82º C

-

-

-

15

15

15

25

25

30

40

Copper Corrosion, ASTM D130, 24 hrs @ 121º C

1B

1B

1B

1B

1B

1B

1B

1B

1B

1B

Foam Test, ASTM D 892, Seq I,II,IIITendency / Stability, ml/ml

0/0, 20/0, 0/0

0/0, 0/0, 0/0

0/0, 0/0, 0/0

0/0, 0/0,0/0

0/0, 0/0,0/0

0/0, 0/0,0/0

0/0,0/0,0/0

0/0, 20/0,0/0

0/0,0/0,0/0

0/0, 0/0, 0/0

FZG scuffing test, DIN 51534 (mod), A/16.6/90, Failure

10

11

11

13

13

13+

13+

13+

13+

13+