Grid List

Set Descending Direction

Items 1-10 of 327

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Mobil Delvac Syn Trans Fluid 50 Gallon Container Front

    Mobil Delvac Syn Trans Fluid 50 (Case of 4 - 1 Gallon Containers)

    $182.00

    Mobil Delvac Synthetic Transmission Fluid 50 is a fully synthetic, manual transmission lubricant engineered to meet the most demanding extended drain and OEM warranty requirements. It is recommended for year-round lubrication of manual transmissions in light to severe duty on- and off-highway equipment operating in a wide range of environments. Designed to provide maximum protection and extended operating life to heavy duty transmissions, Mobil Delvac Synthetic Transmission Fluid 50 provides significant advantages over conventional sulphur-phosphorus gear oils, including outstanding high-temperature performance, oxidation stability, wear protection, and corrosion control.

    It has the same viscosity as most SAE 50 engine oils and SAE 90 gear lubricants at the high end of the temperature-viscosity scale, and because of its inherently high viscosity index, it provides stronger film strength at higher temperatures than conventional oils. Mobil Delvac Synthetic Transmission Fluid 50 also ensures effective lubrication at below freezing temperatures without channelling.

    The outstanding performance of this product is confirmed by its approval for heavy-duty transmissions covered by Eaton Roadranger and Extended Warranties of 750,000 miles, with oil drains of 500,000 miles. It is also approved by Mack against its TO-A Plus 500,000 mile extended service classification. Mobil Delvac Synthetic Transmission Fluid 50 meets or exceeds the requirements of the API service MT-1 EP gear oil service classification and is recommened by ExxonMobil for use in transmissions and gear cases where API Service GL-1 through GL-4 gear protection is required.

    Product Data Sheet

    Learn More
  2. Mobilith SHC 220 Pail

    Mobilith SHC 220 (PAIL)

    $270.00

    Mobilith SHC 220 is a supreme performance NLGI Grade 2 multipurpose, heavy duty grease. It is formulated with Synthetic ISO Viscosity Grade (VG) 220 base fluid and a high quality lithium complex thickener. It has a recommended operating temperature range of -40 °C to 150 °C with appropriate relubrication intervals. Mobilith SHC 220 meets or exceeds DIN 51825: (2004-06) KPHC 2N-30. This grease has a lower coefficient of friction than similar conventional greases and has the potential to provide increased mechanical life and reduced energy consumption.

    Mobilith SHC 220 is an extreme pressure (EP), high temperature grease recommended for heavy-duty automotive and industrial applications. It can be used in a variety of applications including chassis lube points and wheel bearings.

    Product Data Sheet

    Learn More
  3. Mobilgrease XHP 221 (Case - 10 Tubes)

    Mobilgrease XHP 221 (Case - 10 Tubes)

    $34.50

    Mobilgrease 221 is formulated to provide superior adhesion, structural stability, and resistance to water contamination. Mobilgrease XHP 221 provides critical film strength on roller bearings, plain journal bearings, and excellent protection against rust and corrosion. MobilGrease XHP 221 is recommended for industrial & marine applications requiring lubricants to perform at high performance levels in roller bearings as well as pins and bushings for extended periods.

    MobilGrease XHP 221 grease has an ISO VG 220 Base Oil, Lithium Complex NLGI 1 thickener, with good low temperature pumping performance used in many auto-lubrication systems, while not sacrificing high temperature capabilities.

    Product Data Sheet

    Learn More
  4. Mobilgrease XHP 221 (Pail)

    Mobilgrease XHP 221 (Pail)

    $127.00

    Mobilgrease 221 is formulated to provide superior adhesion, structural stability, and resistance to water contamination. Mobilgrease XHP 221 provides critical film strength on roller bearings, plain journal bearings, and excellent protection against rust and corrosion. MobilGrease XHP 221 is recommended for industrial & marine applications requiring lubricants to perform at high performance levels in roller bearings as well as pins and bushings for extended periods.

    MobilGrease XHP 221 grease has an ISO VG 220 Base Oil, Lithium Complex NLGI 1 thickener, with good low temperature pumping performance used in many auto-lubrication systems, while not sacrificing high temperature capabilities.

    Product Data Sheet

    Learn More
  5. Mobilgrease XHP 222 Special Pail

    Mobilgrease XHP 222 Special (PAIL)

    $145.00

    This product is non-stock and has a lead time of 10-14 business days.

    Mobilgrease XHP 222 Special is a formulated with Molybdenum disulfide to provide additional lubrication film strength and protection of critical components in shock loaded applications. Mobilgrease XHP 222 Special performs at very high levels in farm applications, vehicle chassis lubrication, especially in truck shackle pins, king pins, and universal joints. XHP 222 Special is ISO 220 VG base oil, NLGI 2, Lithium Complex grease with up to 1% Molybdenum disulfide.

    Learn more about which MobilGrease XHP 220 grease is best for your application in the "Typical Properties" section below, or click the link below to see the Product Data Sheet for the MobilGrease XHP 220 series on ExxonMobil's website.

    Product Data Sheet

    Learn More
  6. Mobilgrease XHP 222 Cartridge

    Mobilgrease XHP 222 (Case - 10 Tubes)

    $35.12

    Mobilgrease 222 is formulated to provide excellent high temperature performance with superb adhesion, structural stability, and resistance to water contamination. Mobilgrease XHP 222 provides excellent film strength on roller bearings, plain journal bearings, as well as pins and bushings while offering excellent protection against rust and corrosion. MobilGrease XHP 222 is recommended for industrial & marine applications requiring lubricants to perform at high performance levels in roller bearings as well as pins and bushings for extended periods. The superior film strength coupled with anti-rust and corrosion properties of Mobilgrease XHP 222 make it an excellent choice for vehicle chassis components and other demanding operating conditions where high temperature, water contamination, shock loading and extended re-lubrication operations require a high performance product.

    MobilGrease XHP 222 is an NLGI 2 grease with an ISO VG 220 base oil and lithium complex thickener.

    Product Data Sheet

    Learn More
  7. Mobil XHP 222 Special Cartridge

    Mobilgrease XHP 222 Special (Case - 10 Tubes)

    $38.00

    Mobilgrease XHP 222 Special is a formulated with Molybdenum disulfide to provide additional lubrication film strength and protection of critical components in shock loaded applications. Mobilgrease XHP 222 Special performs at very high levels in farm applications, vehicle chassis lubrication, especially in truck shackle pins, king pins, and universal joints. XHP 222 Special is ISO 220 VG base oil, NLGI 2, Lithium Complex grease with up to 1% Molybdenum disulfide.

    Learn more about which MobilGrease XHP 220 grease is best for your application in the "Typical Properties" section below, or click the link below to see the PDS/MSDS for the MobilGrease XHP 220 series on ExxonMobil's website.

    Product Data Sheet

    Learn More
  8. Mobilgrease XHP 222 Pail

    Mobilgrease XHP 222 (PAIL)

    $129.00

    Mobilgrease 222 is formulated to provide excellent high temperature performance with superb adhesion, structural stability, and resistance to water contamination. Mobilgrease XHP 222 provides excellent film strength on roller bearings, plain journal bearings, as well as pins and bushings while offering excellent protection against rust and corrosion. MobilGrease XHP 222 is recommended for industrial & marine applications requiring lubricants to perform at high performance levels in roller bearings as well as pins and bushings for extended periods. The superior film strength coupled with anti-rust and corrosion properties of Mobilgrease XHP 222 make it an excellent choice for vehicle chassis components and other demanding operating conditions where high temperature, water contamination, shock loading and extended re-lubrication operations require a high performance product.

    Mobilgrease XHP 222 is an NLGI 2 grease with an ISO VG 220 base oil and a lithium complex thickener.

    Product Data Sheet

    Learn More
  9. Mobilmet S-122 Pail

    Mobilmet S-122 (PAIL)

    $113.29

    Mobilmet S-122 is a water-soluble, general-purpose cutting oil designed for moderate-duty cutting and metalworking operations. Mobilmet S-122 fluid is formulated with select base oils and fortified with soaps, sulfonates and coupling agents. It also contains stabilizers to control odor and provide long service life.

    PDS/MSDS

    Learn More
  10. Mobilith SHC 220

    Mobilith SHC 220 (Case - 10 Tubes)

    $75.00

    Mobilith SHC 220 is a supreme performance NLGI Grade 2 multipurpose, heavy duty grease. It is formulated with Synthetic ISO Viscosity Grade (VG) 220 base fluid and a high quality lithium complex thickener. It has a recommended operating temperature range of -40 °C to 150 °C with appropriate relubrication intervals. Mobilith SHC 220 meets or exceeds DIN 51825: (2004-06) KPHC 2N-30. This grease has a lower coefficient of friction than similar conventional greases and has the potential to provide increased mechanical life and reduced energy consumption.

    Mobilith SHC 220 is an extreme pressure (EP), high temperature grease recommended for heavy-duty automotive and industrial applications. It can be used in a variety of applications including chassis lube points and wheel bearings.

    Product Data Sheet

    Learn More

Grid List

Set Descending Direction

Items 1-10 of 327

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5